How to Use SuperJUMBLO with your SIP device


You need a username and password in order to call with SuperJUMBLO..
Simply sign up and create your login.

Hardware settings

Most SIP devices are equipped with a combination of the following ports.
Example 1

(this is merely an example layout, every type of device can be different)

Example 2
(this is merely an example layout, every type of device can be different)

adda (A)DSL: connect your line from your (A)DSL provider (not available on a ATA)
e5dtd WAN: connect your line from your xDSL modem/router
rtvd LAN: port for your (home) network, you can connect e.g. your PC, lap-top, network-printer or wireless router
ugh PHONE: here you can connect your analogue telephone
wrfdc LINE: connect your analogue (PSTN) telephone line
hggg USB: you can connect PC or lap-top with a free USB port

Some SIP devices have more than one LAN port and/or PHONE port available.

For the hardware connections from your SIP device look at the above information and check the manual that came with your SIP phone or router.
After connecting the hardware you have to make sure that your software is installed and configured the right way.

Software settings


xzcxv SIP port : 5060
iuhh Registrar :
cxvxv Proxy server :
sads Outbound proxy server : leave empty
axz Account name : your SuperJUMBLO username
adsq Password : your SuperJUMBLO password
adasd Display name/number : your sipusername or sipnumber
ad Stunserver (option) :


zcz G.711 (64 kbps)
aa G.726 (32 kbps)
xvxv G.729 (8 kbps)
ewrdw G.723 (5.3 & 6.3 kbps)
xzcs GSMFR (13.2 kbps) Temporarily unavailable due to technical difficulties.

If you have audio problems

Use a STUN server (e.g. with port 3478 (if supported by your device)
Use the G.711 codec
For more information, please visit our FAQ section here.